| Model No.FP-10 |
|
 <Specification>
- Size(mm): 600(W)x60(D)x600(H)
- Air compressor motor: 2HP, 220V,
2P (380V, 3P)
- Vacuum: 38L
- Max air consumption: 0.17/min
- Vacuum degree: 2500 (mmH2O)
- Air pencil tip(mm): 3
<Characteristics>
- Possible to use as visitor's experiencing tool in museum or exhibition
- Fossil carving pencil operated by compressed air
- Equipped with dust collecting device to collect the dust generated during carving work
- Good working efficiency by high speed
- Less trouble by using compressed air
- Convenient for installation in narrow space with it's integrated type body (dust collecting device and working platform in a body)
- Keeping pleasant working environment by collecting the dust generated during carving work
<Accessories>
- Air
pen: 1 set
- Compressor (closed type): 1 set
<Option>
- Micro Jack
- Harden air pen
- Magnifier
<Fossil carving>
  
<Micro Jack>
<Harden air pen> <Magnifier>
|
| Model No.FP-10 (Option) - Compressor Soundproof
Case |
|
 <Specification>
- Size:
500x1200x800 mm)
- Air compressor: 2 hp
- Electricity : 220 V, 60 Hz
<Characteristics>
- Noise minimization of indoor working place
- Ventilation
fan to expel heat
|
| Model No.FP-50 Fossil Grinder |
 <Specification>
- Size: 500(W)x600(D)x1400(H) mm
- Motor: 1 hp, 2 P/220 V, 3 P/380 V
- rpm : 800
- Grinder plate: Cast iron 350ØX30t
<Characteristics>
- Grinding fossils to regular thickness for thin
sectioning
- Easy change of grinder plate
- 3 times grinding speed than normal thin sectioning work (rotation of grinder plate)
- Grinding large rocks
- Double protection means from sludge on main rotating part of shaft
- Vibration free and horizontal maintaining by using firm frame
- Re-usable of silicon carbide powder
- Speed control via water tap valve (0~1750 rpm)
|
| Model No.FP-60 Fossil Polisher |
<Specification>
- Size: 500(W)x600(D)x1400(H) mm
- Motor: 1 hp, 2 P/220 V, 3 P/380 V
- rpm: 1200
- Polishing Plate: Cast iron 350Øx20t,
mm
<Characteristics>
- Polishing fossils for thin sectioning
- Easy change of grinder plate
- 3 times grinding speed than normal thin sectioning work (rotation of grinder plate)
- Polishing large rocks
- Vibration free and horizontal maintaining by using firm frame
- Re-usable of silicon carbide powder
- Speed control via water tap valve (0~1750 rpm)
|
