Machines, Tools & Accessories for Rock Processing

The typical type of machines are as follows.  The modification of machine according to the change of processing is possible.  Click the name to see the details.

Machines, Tools & Accessories

Rock & Core Saw

 

Model No.BSW-10 (Slab Saw)

<Specification>

  • Size(mm): 1000(W)x1400(D)x1290(H)
  • Motor: 2HP, 220V. 2P (380V 3P)
  • Shaft(mm): 25.4
  • Diamond saw(mm): 500x3.2t
  • Revolution: 1750 rpm
  • Inverter speed motor: 25W 220V, S8125GT
  • Cooling pump: 220V, 7W 1.7m 800 ℓ /hr
  • Vise speed inverter: FR 2520 0.2K

<Characteristics>

  • Cutting a rock or NX core with regular thickness
  • Movement of the rock or NX core together with vise
  • Cooling water circulation by the attached cooling water pump and the control of cooling water quantity
  • Height position control and changeable of diamond saw size (up to max. 350 mm)
  • Transverse or longitudinal direction cutting of NX core
  • Movement by the handle after NX core fixing
  • Smooth cutting movement and low noise
  • Water-proof On/Off switch

<Accessories>

  • Diamond saw blade for rock slabbing: 500x3.2t mm, 1 ea
  • Cooling tank: 1 set

< Please click the below photos for video watching of ex-model of BSW-10>

       

                                    < Diamond saw - vise                                             <Slab cutting>
 

Model No.BSW-20 (Core Cutting Machine)

<Specification>

  • Size(mm) : 600(950)x950x800(1200)
  • Motor: 1HP, 220V(380V, 3P), 2P
  • Shaft: 25.4mm (1")
  • Vise(mm): 150x80x250
  • Revolution: 2500 rpm
  • Diamond saw: 10"(8”)
  • Vise speed motor: 25W, 220V, S8125 GT
  • Vise speed motor inverter: FR 2520.0.2K

<Characteristics>

  • Cutting rock by vise fixing
  • Automatic supply of cooling water
  • Shifting by a lever
  • Fixed or movable type vise
  • For cutting rock core or concrete, or for cutting metallic material
  • Efficient working by automatic shifting of vise
  • Separately installed cooling pump for easy cleaning

<Accessories>

  • Diamond saw blade for rock slabbing: 250 mm, 1 ea
  • Cooling water tank: 1 set

< Please click any one of the below photos for video watching of BSW-20 >

   

<Setting of X-Y cutting blocks >

<Option>

<Simultaneous Cutting of Four(4)  Rock Cores>
  

Model No.BSW-20-1A (Core Cutting Machine) (for Rock Cutting only)

<Specification>

  • Size(mm) : 600(950)x950x800(1200)
  • Motor: 1HP, 220V(380V, 3P), 2P
  • Shaft: 25.4mm (1")
  • Vise(mm): 150x80x250
  • Revolution: 2500 rpm
  • Diamond saw: 10"(8”)
  • Vise speed motor: 25W, 220V, S8125 GT
  • Vise speed motor inverter: FR 2520.0.2K

<Characteristics>

  • Cutting rock by vise fixing
  • Automatic supply of cooling water
  • Shifting by a lever
  • Fixed or movable type vise
  • For rock cutting only
  • Efficient working by automatic shifting of vise
  • Separately installed cooling pump for easy cleaning
  • Speed adjustable depending on the characteristics of a rock or a specimen
  • Tightness type for the maximization of noise prevention

<Accessories>

  • Diamond saw blade for rock slabbing: 250 mm, 1 ea
  • Cooling water tank: 1 set
     

Model No.BSW-30 (Core Cutting Machine) (Movable Type)

<Specification>

  • Size(mm): 600(W)x900(D)x1450(H)
  • Power: 220V, 2P (380V, 3P), 60Hz
  • Motor: 1HP (Max. 2HP)
  • Shaft: 5/8" - 1"
  • Table center Length(mm): 300
  • Spindle speed(rpm): 1750
  • Diamond wheel(mm): 205x1.2t - 350x2.0t
  • NX core cutting length(mm): 300

<Characteristics>

  • Rock shifting with vise
  • For cutting metal or ceramic
  • Convenient rock core cutting by V-block
  • Cooling water circulation by the attached cooling water pump
  • Cutting length adjustment by a guide (for core cutting)
  • Watert-proof On/Off switch
  • Smooth cutting movement and low noise

<Accessories>

  • Diamond saw blade: 250 mm x 1.2 t, 1 ea
     

<Nx Core Cutting in Transverse Direction>

<Nx Core Cutting in Long. Direction>


<Option: Shifting Table for Rock Cutting>
 

 

  Characteristics:

  • Cutting the rock which is mounted on the shifting table by pushing the table.
  • Therefore, it is safer than cutting the rock by hand-holding.
  • Faster cutting speed.
  • Durable and good wear resistant because it is made of steel plate and MC (Monomer Cast) Nylon plate.

<The rock placed on the shifting table>

 

 

<Rock Cutting Lab in
Korea Basic Science Institute>

 

Model No.BSW-40 (Trim Saw)

<Specification>

  • Size(mm): 600(W)x600(D)X650(H)
  • Power: 220V, 2P, 380V, 3P, 60Hz
  • Motor: 1HP, 2HP (Diamond saw 10")
  • Shaft: 5/8"
  • Table center Length(mm): 300
  • Spindle speed(rpm): 1750
  • Diamond wheel(mm): 205x1.2t -250x1.6t(Option )

<Characteristics>

  • Cutting rock or jewel to uniform size
  • For cutting metal or ceramic
  • Recirculation of cooling water in the tank  

<Accessories>

  • Diamond saw blade for rock cutting: 250 mm

<Working table >
 

Model No.BSW-50 (Trim Saw)

<Specification>

  • Size(mm): 450(W)x550(D)x400(H)
  • Motor: 1/4HP, 220V, 2P (380V,3P)
  • Table size(mm): 200x300
  • Diamond saw(mm): 150x0.6t, 1.0t(Option )
  • Revolution: 3600 rpm
  • Vise jaw(mm): 30x50
  • Shaft: 5/8 inch  t

<Characteristics>

  • For cutting rock or jewel to small size
  • For cutting rock or ceramic
  • Small size to handle and move easily
  • Convenient for minute working with thin saw
  • Small forces on the cutting part

<Accessories>

  • Diamond saw blade for rock cutting : 150mmx 0.6t: 1 ea

       

                                        <Vise setting >                                                      <Vise open>
 

Model No. BSW-51 (Vacuum Cutting Machine)

<Specification>

  • Size: 450x550x400 mm
  • Table size: 200x300 mm
  • Motor: 1/4 hp, 220 V
  • Shaft : 5/8 inch
  • Revolution: 3600 rpm
  • Diamond saw : 150 mm
  • Vacuum pump: 1 set

<Characteristics>

  • For making thin slab
  • Attachment of material by vacuum after bonding to slide
  • Cooling water supply by diamond saw blade itself
  • Diamond saw blade
  • Transparent acrylic cover
  • Guide rail for easy sawing 

 

Model No.BSW-52

<Specification>

  • Size(mm): 600(W)x550(D)x600(H)
  • Motor: 1HP, 220V, 2P (380V, 3P)
  • Table size(mm): 300x400
  • Diamond saw(mm): 250x1.0t, 1.6t, 2t(Option )
  • Revolution: 1700 rpm
  • Vise jaw(mm): 60x70
  • Shaft: 5/8 inch 

<Characteristics>

  • For regular slabbing of rock
  • Cooling water supply from cooling water tank to saw blade
  • Transparent acrylic cover
  • Rock vise
  • Table type machine
  • Waterproof switch 

<Accessories>

  • Diamond saw blade : 250mm

<Setting of vise >
 

Model No.BSW-52-1 Core Cutting Machine

<Specification>

  • Size(mm): 600(W)x650(D)x600(H)
  • Maximum cutting length in longitudinal: 300 mm
  • Maximum cutting diameter: 75 Ø
  • Motor: 1HP, 220V, 2P (380V, 3P)
  • Table Size(mm): 300x400
  • Diamond Saw(mm): 250x1.0t, 1.6t, 2t(Option )
  • Revolution: 1700 rpm
  • Vise Jaw(mm): 120x70
  • Shaft: 1 inch 

<Accessories>

  • Diamond saw: 250mm, 1 ea

<Characteristics>

  • Rock core cutting with regular span
  • Transportable by car to field (loadable in car trunk)
  • Water spatter prevention
  • Cooling water self-circulation type
  • Manual type
  • Rock core cutting in longitudinal or transverse direction
  • Vise for block rock fixing
  • Slabbing by vise move
     

<Longitudinal Cutting of Core>

<Transverse Cutting of Core>

 

<Span adjustment of Vise>

 

 

Model No.RSW-10 Sapphire Cutting Machine

<Specification>

  • Size: 900x1500x 900 mm
  • Motor main shaft: 2 hp, 3 P, 220 V
  • Transferring motor: 30 W, D/C
  • Cooling water pump: 3 P, 220 V, 30 l/min, 0.35A/0.2A
  • Diamond saw blade: 12"
  • Vise: 90x200x350 mm
  • rpm: 1700

<Characteristics>

  • For thin slabbing sapphire, concrete core or rock core to the  length of 100mm & below (length : 400mm & below)
  • For rock cutting
  • Rust free with stainless steel and non-ferrous metal
  • Vise shifting length of 300mm
  • Auto-shifting and auto-return after cutting

 

538-7, Opo-Ro, Gwangju-Si, Gyeonggi-Do, 12774, Korea TEL: +82 (0)31 766 0862 | FAX: +82 (0)31 766 0863

Copyright @ 2002~2025 GemTec All Rights Reserved.