Machines, Tools & Accessories for Rock Processing

The typical type of machines are as follows.  The modification of machine according to the change of processing is possible.  Click the name to see the details.

Machines, Tools & Accessories

Thin Section Grinder & Polisher

Model No.RTG-10 Thin Section Grinder

<Specification>

  • Size: 500(W)x600(D)x1400(H)
  • Motor:1 hp, 2 P 220 V, 3 P 380 V
  • rpm: 800
  • Grinder plate: Cast iron 350ØX30t

<Characteristics>

  • Grinding rocks to regular  thickness for thin sectioning
  • Easy change of grinder plate
  • 3 times grinding speed in case glass plate (rotation of grinder plate)
  • Grinding large rocks
  • Double protection means from sludge on main rotating part of shaft
  • Vibration free and horizontal maintaining by using firm frame
  • Re-usable of silicon carbide powder
  • Speed control via water tap valve (0-1750 rpm)
     

Model No.RTP-10 Thin Section Polisher

<Specification>

  • Size: 500(W)x600(D)x1400(H)
  • Motor: 1 hp, 2 P 220 V, 3 P 380 V
  • rpm: 1200
  • Polishing plate: Cast iron 350Øx20t

<Characteristics>

  • Polishing rocks for thin sectioning
  • Easy change of grinder plate
  • 3 times grinding speed in case glass plate (rotation of grinder plate)
  • Polishing large rocks
  • Vibration free and horizontal maintaining by using firm frame
  • Re-usable of silicon carbide powder
  • Speed control via water tap valve (0~1750 rpm)
     

538-7, Opo-Ro, Gwangju-Si, Gyeonggi-Do, 12774, Korea TEL: +82 (0)31 766 0862 | FAX: +82 (0)31 766 0863

Copyright @ 2002~2024 GemTec All Rights Reserved.