Machines, Tools & Accessories for Rock Processing

The typical type of machines are as follows.  The modification of machine according to the change of processing is possible.  Click the name to see the details.

 

Machines, Tools & Accessories

Rock Grinder

Model No.BGR-10

<Specification>

  • Size(mm): 550(W)x550(D)x600(H)
  • Motor: 1/4HP, 220V, 2P (380V,3P)
  • Plate(mm): 205
  • Dot Type Diamond Disc(mm): 205
  • Revolution: 0-800
  • Cooling Pump: 220V,7W 1.7m 800 /hr

<Characteristics>

  • Using of diamond disc
  • High cutting speed with cooling water pump
  • Convenient in working place not equipped with drainage means (recirculation of cooling water)
  • Speed changes dependent on the hardness of rock or metal
  • Disc changes dependent on the structure of metal or rock (surface roughness) 

<Accessories>

  • Cooling pump: 1 set
  • Dot Type Diamond Disc: 200# 1 ea
  • Optional Disc: 200, 400, 600, 800, 1500, 2000#
  • Optional Slide Glass Holder: 28x48mm

 

<Magnetic Type Diamond Disc>

  • Dot Type Diamond Disc


     

<Enlargement of the Topside>

 

<Merits of Dot Type, As Compared with the Conventional Type>

  • Faster polishing speed
  • Clean working environment due to the rapid releasing of the grinded ones
  • Better durability
  • <Patent pending>
  • Conventional Type Diamond Disc

     

<Slide Glass Holder>

 

Model No.BGR-10-1

<Specification>

  • Size(mm): 450(W)x700(D)x330(H)
  • Motor: 1/4HP, 220V, 2P
  • Plate(mm): 205
  • Dot Type Diamond Disc(mm): 205
  • Revolution: 0-800
  • Cooling Pump: 220V,7W 1.7m 800 /hr

<Characteristics>

  • For grinding or polishing of rock sample or rock thin section
  • Cooling water circulation by the cooling water pump which is located separately outside the machine
  • Speed changes dependent on the hardness of rock
  • Grlnder plate cover of stainless steel (for rust prevention)
  • Attachment by magnetic plate
  • High working efficiency by diamond disc (10 time faster than working with abrasive)
  • Desk-top type

<Accessories>

  • Cooling pump: 1 set
  • Dot Type Diamond Disc: 200# 1 ea
  • Option : Aluminum Polishing Plate 300 mm
  • Optional Disc: 200, 400, 600, 800, 1500, 2000#
  • Option Slide Glass Holder: 28x48mm
     

<Enlargement of the Topside>


 

<Merits of Dot Type, As Compared with the Conventional Type>

  • Faster polishing speed
  • Clean working environment due to the rapid releasing of the grinded ones
  • Better durability
  • <Patent pending>
  • Conventional Type Diamond Disc

     

<Attachment of Aluminum Polishing Plate >

 

Model No.BGR-20 (Hand Piece)

<Specification>

  • Size: 250x250x560
  • Motor: 1/4 hp, 220 V, 380 V
  • rpm: 2500, 1700, 800 (3 stage pulley)
  • Grinder plate: 205Ø
  • Shaft: 1/2 inch

<Characteristics>

  • For manufacturing thin plate by diamond disc or casting iron plate
  • For grinding & polishing jewels or rocks
  • Protractor (option for rock grinder)
     

Model No.BGR-30 (Grinder Lap)

<Specification>

  • Size: 600x600x1100
  • Motor :1/2 hp, 220 V, 380 V
  • rpm: 2500, 800
  • Shaft : 5/8 inch
  • Grinder lap: 250Øx 2, cast iron disc

<Characteristics>

  • For grinding & polishing jewels or rocks by sand powder
  • Two plates for grinding and polishing
     

Model No.GLP-20 Thin Section Working Table)

<Specification>

  • Size(mm): 430(W)x300(D)x80(H)
  • Glass Size(mm): 240x360x8t
  • Weight(kg): 5.7

<Characteristics>

  • Working table for surface grinding of rock  thin section making
  • Aluminium body of corrosion proof
  • Sloped surface to collect slurry
  • Glass plate having  both surfaces can be used 

<Accessories>

<Option >

  • Abrasive: 100#, 200#, 400#, 800#, 1500#, 2000#
    respectively 5 kg packing

       

                <Rock chip bonding >                            < Rock chip >                               <Hand working>

<Abrassives >
 

538-7, Opo-Ro, Gwangju-Si, Gyeonggi-Do, 12774, Korea TEL: +82 (0)31 766 0862 | FAX: +82 (0)31 766 0863

Copyright @ 2002~2023 GemTec All Rights Reserved.